5.2.3 System Control—MOH—Status / Backup
MOH files stored on a PBX can be downloaded to the user
’s PC.
This screen can be accessed only in On-line mode.
1. From Site No., select a PBX from which to download MOH files.
2. The MOH files saved to the PBX will be listed. Click Backup for the file you would like to back up. One file
can be backed up at a time.
3. A save file dialog will appear. Specify the directory on the PC to back up the file to.
4. Click OK when finished.
Note
• Users
logged in to the Master unit can see the status of all One-look network sites. Users logged in to
a Slave unit may only view the status of that PBX.
• Remained Capacity Time indicates the amount of time available for new MOH files to be added. The
amount of time of any MOH files scheduled to be uploaded in 5.2.1 System
Control—MOH—Install is not reflected in this value.
• User (User) level accounts cannot perform this procedure.
Document Version 2016-03 PC Programming Manual 85
5.2.3 System Control—MOH—Status / Backup
To Next Page
Loading...
