Panasonic KX-NS1000 - Network Service-[2-6] Server Feature-SMTP

28.2.5 Network Service—[2-6] Server Feature—SMTP
Settings for SMTP for sending e-mail for PBX functions can be programmed.
Mail sending—Mail sender information name
Specifies the name to be used as the sender of the e
-mails from the PBX.
Default
KX-NS1000
Value Range
Max. 64 characters
Maintenance Console Location
28.2.5 Network Service—[2-6] Server Feature—SMTP
Mail sending—Mail address
Specifies the sending e
-mail address for messages sent from the PBX. This address, for example, could be
set as the e-mail address of an administrator.
Default
Not stored
Value Range
Max. 128 characters
Maintenance Console Location
28.2.5 Network Service—[2-6] Server Feature—SMTP
SMTP server for relay—SMTP server address—IP Address
Specifies the IP address of the SMTP server to be used to send e-mails.
Default
Not stored
Value Range
1.0.0.0–223.255.255.255
Maintenance Console Location
28.2.5 Network Service—[2-6] Server Feature—SMTP
Installation Manual References
8.6.5 DNS Client
Document Version 2016-03 PC Programming Manual 1209
28.2.5 Network Service—[2-6] Server Feature—SMTP