Panasonic KX-NS1000 - PBX Configuration-[1-1] Configuration-Slot-UM Port Property

9.7 PBX Configuration—[1-1]
Configuration—Slot
—UM Port Property
The properties of the Unified Messaging (UM) system’s ports can be specified.
Main
The Port for each item is displayed for your reference. For details, see Common Programming Reference
Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Extension Number
Specifies the extension number of the port.
Default
Port 1: 5101
Port 2: 5102
Others: Not stored
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
9.7 PBX Configuration—[1-1] Configuration
—Slot—UM Port Property
Connection
Indicates
the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Default
1–2: INS
3–24: OUS
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
9.7 PBX Configuration—[1-1] Configuration—Slot—UM Port Property
Programming Manual References
9.1 PBX Configuration—[1-1] Configuration—Slot–To change the status (INS/OUS) of a card (On-line mode
only)
286 PC Programming Manual Document Version 2016-03
9.7 PBX Configuration—[1-1] Configuration—Slot—UM Port Property