Panasonic KX-NS1000 - PBX Configuration-[3-8] Group-PS Ring Group

11.8 PBX Configuration—[3-8] Group—PS Ring
Group
A
PS ring group is a group of PS extensions that receives incoming calls. Each group has a floating extension
number and name. One PS can belong to multiple PS ring groups. A maximum of 32 PS ring groups can be
programmed, each containing up to 512 PS extensions.
To add PSs to the PS Ring Group, click Member List.
Floating Extension Number
Specifies the floating extension number of the PS ring group.
Default
Not stored
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
11.8 PBX Configuration
—[3-8] Group—PS Ring Group
Feature Manual References
15.1.27 PS—Ring Group
Group Name
Specifies
the name of the PS ring group, which will be shown on the display of extensions that call the PS ring
group when
Incoming Trunk Call Information Display on this screen is set to Called Number.
Default
Not stored
Value Range
Max. 20 characters
Maintenance Console Location
11.8 PBX Configuration
—[3-8] Group—PS Ring Group
Feature Manual References
15.1.27 PS—Ring Group
Incoming Trunk Call Information Display
Specifies the information of the incoming CO line call to be shown on the displays of the PSs that belong to
the PS ring group. If the caller
’s name or called party’s name is not recognized, the telephone number will be
shown.
Document Version 2016-03 PC Programming Manual 687
11.8 PBX Configuration—[3-8] Group—PS Ring Group