9.17 PBX Configuration—[1-1]
Configuration—Slot
—V-SIPEXT32—Port Property
Various settings can be programmed for each virtual SIP extension port.
The Site, Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Main
Extension Number
Specifies the extension number of the port.
Default
Starting at 101
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
9.17 PBX Configuration
—[1-1] Configuration—Slot—V-SIPEXT32—Port Property
Feature Manual References
18.1.2 SIP (Session Initiation Protocol) Extension
Password
Specifies the password used for registering a SIP Extension to the PBX. While it is possible to enter a password
manually for each SIP Extension, you can copy Extension Number to Password by clicking the Copy
to button. This parameter can only be modified when the virtual SIP extension port is set to
OUS, and the
programmer must be in On-line mode.
Default
Not stored
Value Range
4–16 characters (consisting of 0–9, a–z, A–Z)
Maintenance Console Location
9.17 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT32—Port Property
Feature Manual References
18.1.2 SIP (Session Initiation Protocol) Extension
Document Version 2016-03 PC Programming Manual 379
9.17 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT32—Port Property
To Next Page
Loading...
