10.1 PBX Configuration—[2-1] System—Date &
Time
10.1.1 PBX Configuration—[2-1-1] System—Date & Time—Date
& Time Setting
The date and time of the PBX can be programmed. The date and time will be shown on the display of extensions
(e.g., PT, PS).
This screen can be accessed only in On-line mode.
Date & Time
Indicates
the current date and time. Values can be entered by clicking the parameter you want to change and
typing the new value, or by clicking the up/down arrows beside the date and time.
Note
When
this setting is changed and applied, it may take between 1 minute and several hours (depending on
the configuration of the PBX network) for all connected IP-PTs to reflect this change on their displays.
• At default settings, KX-UT series SIP phones synchronize to the PBX’s date and time once every hour.
Default
Current date and time
Value Range
Year: 2000–2035
Month: 01–12
Day: 01–31
Hour: 00–23
Minute: 00–59
Second: 00–59
Maintenance Console Location
10.1.1 PBX Configuration—[2-1-1] System—Date & Time—Date & Time Setting
484 PC Programming Manual Document Version 2016-03
10.1.1 PBX Configuration—[2-1-1] System—Date & Time—Date & Time Setting
To Next Page
Loading...
