Panasonic KX-NS1000 - PBX Configuration-[3-1-4] Group-Dialing Plan-Auto Assign

11.1.4.1 PBX Configuration—[3-1-4] Group—Dialing Plan—Auto
Assign
It is possible to assign a set of leading numbers automatically.
Select Auto Assigning Table
Selects the set of preset leading number values to assign to the active dialing plan table. When
Type D is
selected, you will be prompted to enter a 3-digit area code, and 7 "X"s, in cells 1 through 47 of the dialing plan
table.
Default
Type A
Value Range
Type A:
• 1: N11
• 2: NXX XXXX
• 3: 1NXX NXX XXXX
• 4–50: Not stored
Type B:
• 1: N11
• 2: NNX XXXX
• 3: 1NPX NXX XXXX
• 4–50: Not stored
Type C:
• 1: N11
• 2: NXX XXXX
• 3: 1NNX XXXX
• 4: 1NPX NXX XXXX
• 5–50: Not stored
Type D:
• 1–47: Not stored
• 48: N11
• 49: NXX XXXX
• 50: 1NXX NXX XXXX
Type E:
• 1: N11
• 2: NXX NXX XXXX
• 3: 1NXX NXX XXXX
• 4–50: Not stored
Maintenance Console Location
11.1.4.1 PBX Configuration—[3-1-4] Group—Dialing Plan—Auto Assign
Programming Manual References
11.1.4 PBX Configuration—[3-1-4] Group—Trunk Group—Dialing Plan
Document Version 2016-03 PC Programming Manual 639
11.1.4 PBX Configuration—[3-1-4] Group—Trunk Group—Dialing Plan