Panasonic KX-NS1000 - PBX Configuration-[1-1] Configuration-Slot-Card Property - PRI Type

9.26 PBX Configuration—[1-1]
Configuration—Slot
—Card Property - PRI type
The properties of the PRI card can be specified.
ISDN CO / QSIG Master / QSIG Slave—T200
Specifies the maximum time that the PBX waits for a reply after sending the L2 command to ISDN.
Default
10
Value Range
0–600 ´ 100 ms
Maintenance Console Location
9.26 PBX Configuration
—[1-1] Configuration—Slot—Card Property - PRI type
ISDN CO / QSIG Master / QSIG Slave—T202
Specifies
the maximum time that the PBX waits for a reply after resending the request to use an ISDN line as
a TIE line.
Default
20
Value Range
0–600 ´ 100 ms
Maintenance Console Location
9.26 PBX Configuration—[1-1] Configuration—Slot—Card Property - PRI type
Feature Manual References
15.1.12 PRIVATE NETWORK FEATURES
ISDN CO / QSIG Master / QSIG Slave—T203
Specifies the length of time to detect no communication status of L2.
Default
100
Value Range
0–600 ´ 100 ms
Maintenance Console Location
9.26 PBX Configuration
—[1-1] Configuration—Slot—Card Property - PRI type
Document Version 2016-03 PC Programming Manual 441
9.26 PBX Configuration—[1-1] Configuration—Slot—Card Property - PRI type