Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Programming Manual References
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button—
Parameter Selection
(for SDN)
Feature Manual References
15.1.4 PDN (Primary Directory Number)/SDN
(Secondary Directory Number) Extension
Transfer—Automatic Answer for Transferred Call
Enables transferred calls
(including direct extension calls) to be automatically answered, when using the
Hands-free Answerback feature.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Manual References
9.1.1 Hands-free Answerback
Display Information from Mobile Extension (MEX)—when using Automatic
Walking COS
If
Automatic Walking COS is being used, this selects whether to show the CLI destination’s extension number
as the CLIP information (Extension Number), or the MEX CLIP information (MEX CLIP) when the incoming
call is recognized as coming from a MEX terminal.
Default
Extension Number
Value Range
Extension Number, MEX CLIP
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Manual References
5.1.10 DISA (Direct Inward System Access)
602 PC Programming Manual Document Version 2016-03
10.9 PBX Configuration—[2-9] System—System Options
To Next Page
Loading...
