Panasonic KX-NS1000 - Router Configuration-VPN-[3-3] Pass through

27.11 Router Configuration—VPN—[3-3] Pass
Through
IPSec Pass Through
Selects whether to enable IPSec Pass Through.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
27.11 Router Configuration
—VPN—[3-3] Pass Through
IPSec Pass Through—IP Address
Specifies the IP address assigned from the IPSec server when connected.
If Disable is selected for IPSec Pass Through, this item is grayed out.
Default
Not stored
Value Range
1.0.0.1–223.255.255.254
Maintenance Console Location
27.11 Router Configuration
—VPN—[3-3] Pass Through
PPTP Pass Through
Selects whether to enable PPTP Pass Through.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
27.11 Router Configuration
—VPN—[3-3] Pass Through
PPTP Pass Through—IP Address
Specifies the IP address assigned from the PPTP server when connected.
If Disable is selected for PPTP Pass Through, this item is grayed out.
Document Version 2016-03 PC Programming Manual 1175
27.11 Router Configuration—VPN—[3-3] Pass Through