Panasonic KX-NS1000 - Overflow Queuing Busy

19.1.2 Tenant Service
COS
Specifies
the COS of the incoming call distribution group. Depending on the COS, calls from certain extensions
are restricted as determined by the Internal Call Block feature. Also, when calls are forwarded or overflowed
to a CO line, the TRS assigned for the COS of the incoming call distribution group applies.
Default
1
Value Range
1–512
Maintenance Console Location
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings
Programming Manual References
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
10.7.2 PBX Configuration—[2-7-2] System—Class of Service—External Call Block
10.7.3 PBX Configuration—[2-7-3] System—Class of Service—Internal Call Block
Feature Manual References
10.1.15 Internal Call Block
CLIP on ICD Group Button
Specifies the CLIP number sent to the network when making calls using the ICD Group button.
Default
Not stored
Value Range
Max. 16 digits (consisting of 0–
9, *, and #)
Maintenance Console Location
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings
Feature Manual References
4.1.15 CLIP (Calling Line Identification Presentation)
Overflow Queuing Busy
Floating Extension Number
Specifies the floating extension number of the incoming call distribution group.
654 PC Programming Manual Document Version 2016-03
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings