Panasonic KX-NS1000 - PBX Configuration-[1-1] Configuration-Slot-Shelf Property - Virtual IP Gateway-Hunt Pattern

9.12.2 PBX Configuration—[1-1] Configuration—Slot—Shelf
Property - Virtual IP Gateway—Hunt Pattern
The
related settings of hunt patterns can be programmed. The hunt pattern determines how to route incoming
calls through virtual IP CO lines to the PBX.
A maximum of 32 hunt patterns can be programmed.
Hunt Pattern 1–16
Leading Number
Specifies the leading digits of dialed numbers by which to determine the call distribution port group to direct
incoming calls.
Default
No. 1: 1
No. 2: 2
No. 3: 3
No. 4: 4
No. 5: 5
No. 6: 6
No. 7: 7
No. 8: 8
No. 9: 9
No. 10: 0
No. 11-48: Not stored.
Value Range
Max. 30 digits (consisting of 0–
9)
Maintenance Console Location
9.12.2 PBX Configuration—[1-1] Configuration—Slot—Shelf Property - Virtual IP Gateway—Hunt Pattern
Call Distribution Port Group—1st–16th
Specifies the number of the call distribution port group to which incoming calls are directed in priority.
Default
1st: CDPG 1
2nd–16th: None
Value Range
For 1st:
CDPG1–CDPG48
For 2nd–16th:
None, CDPG1–CDPG48
Maintenance Console Location
9.12.2 PBX Configuration—[1-1] Configuration
—Slot—Shelf Property - Virtual IP Gateway—Hunt Pattern
Document Version 2016-03 PC Programming Manual 351
9.12.2 PBX Configuration—[1-1] Configuration—Slot—Shelf Property - Virtual IP Gateway—Hunt Pattern