7.10.4 Utility—Automatic Two-way Recording—Maintenance
Automatic Two
-way Recording can be enabled or disabled, or set to record until a specified date and time by
a programmer with a User (Administrator) account.
1. To start Automatic Two-way Recording, click Start. The button will change to display Stop.
Two-way recording for all designated extensions will continue until one of the following occurs:
• The Stop button is clicked.
• The two-way recording time limit or memory capacity has been reached.
• The date and time set in Recording Period is reached.
2. To set a specific time when Automatic Two-way Recording will stop:
a. In Recording Period, select Yes for Setting.
b. In Date & Time, enter a year, month, day, hour, and minute. Click on the calendar and clock numbers
to select them.
c. Click OK.
3. To end Automatic Two-way Recording any time, click Stop.
166 PC Programming Manual Document Version 2016-03
7.10.4 Utility—Automatic Two-way Recording—Maintenance
To Next Page
Loading...
