Panasonic KX-NS1000 - UM Configuration-[4-4] Service Settings-Holiday Table

23.4 UM Configuration—[4-4] Service
Settings—Holiday Table
Holidays can be set for and assigned to CO lines and Unified Messaging ports. When a call is received from
a
certain CO line or by a certain subscriber during the time frame set for an assigned holiday, the call handling
settings for that holiday will be used. This screen is similar to the table found in 10.5 PBX
Configuration—[2-5] System—Holiday Table. You can also access the PBX Holiday Table directly by clicking
the PBX Holiday Table tab. A maximum of 24 different holidays can be programmed.
Setting
Enables the setting of the holiday. This setting synchronizes with the PBX
’s Holiday Table.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
23.4 UM Configuration—[4-4] Service Settings—Holiday Table
Feature Manual References
20.1.43 Unified Messaging—Holiday Service
PC Programming Manual References
10.5 PBX Configuration—[2-5] System—Holiday Table—
Holiday Table—Setting
Name of Holiday
Specifies the name of the holiday setting for later reference.
Default
Not stored
Value Range
Max. 32 Characters
Maintenance Console Location
23.4 UM Configuration
—[4-4] Service Settings—Holiday Table
Feature Manual References
20.1.43 Unified Messaging—Holiday Service
Document Version 2016-03 PC Programming Manual 1035
23.4 UM Configuration—[4-4] Service Settings—Holiday Table