Panasonic KX-NS1000 - Host Pbx Access Code

DISA Tone Detection—Continuous
Enables the disconnection of a DISA
-originated CO-to-CO line call by continuous signal detection.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
Programming Manual References
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings
Feature Manual References
5.1.10 DISA (Direct Inward System Access)
DISA Tone Detection—Cyclic
Enables the disconnection of a DISA
-originated CO-to-CO line call by cyclic signal detection.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
Programming Manual References
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings
Feature Manual References
5.1.10 DISA (Direct Inward System Access)
Host PBX Access Code
Group Name
Specifies the name of the trunk group for programming reference.
628 PC Programming Manual Document Version 2016-03
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings