EasyManua.ls Logo

Panasonic KX-NS1000 - PBX Configuration-[1-1] Configuration-Slot-V-IPGW16-Shelf Property

Panasonic KX-NS1000
1294 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9.12 PBX Configuration—[1-1]
Configuration—Slot
—V-IPGW16—Shelf Property
Common settings for all of the V-IPGW cards installed in the Virtual Shelf can be programmed.
Main
Gatekeeper Available
Specifies whether to use a gatekeeper. This setting can only be changed when all
V-IPGW cards are set to
OUS.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
RTCP Packet Sending Ability
Specifies whether to enable the PBX to send RTCP packets.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
9.12 PBX Configuration
—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
RTCP Packet Interval
Specifies the length of time until the PBX retries to send RTCP packets when no reply is received.
Default
5 s
Value Range
5–60 s
Maintenance Console Location
9.12 PBX Configuration
—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
Document Version 2016-03 PC Programming Manual 333
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property

Table of Contents

Other manuals for Panasonic KX-NS1000

Related product manuals