Panasonic KX-NS1000 - 4.1.2.5 Call Forwarding (CF)-by ISDN (P-P)

Value Range
Yes, No
Maintenance Console Location
9.11 PBX Configuration
—[1-1] Configuration—Slot—V-SIPGW—Port Property
Blind Transfer(REFER)
Specifies whether to allow blind transfers using REFER.
Default
No
Value Range
Yes, No
Maintenance Console Location
9.11 PBX Configuration
—[1-1] Configuration—Slot—V-SIPGW—Port Property
Attended Transfer(REFER)
Specifies whether to allow attended transfers using REFER.
Default
No
Value Range
Yes, No
Maintenance Console Location
9.11 PBX Configuration
—[1-1] Configuration—Slot—V-SIPGW—Port Property
332 PC Programming Manual Document Version 2016-03
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property