Panasonic KX-NS1000 - Page 331

Value Range
P-Asserted-Identity Header
From Header
Note
• To copy values from one location to another, click Copy to.
• If the Channel Attribute setting of the port is "Additional", the setting cannot be changed.
Maintenance Console Location
9.11 PBX Configuration
—[1-1] Configuration—Slot—V-SIPGW—Port Property
CLIR
Specifies whether to allow restriction of the display of the CLIP number on the called party
’s telephone when
making a SIP CO line call.
Default
Yes
Value Range
Yes, No
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
CNIP (Send)
Specifies whether to send the caller
’s name to be displayed on the called party’s telephone when making a
SIP CO line call.
Default
Yes
Value Range
Yes, No
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
CNIP (Receive)
Specifies
whether to receive the caller’s name to be displayed on the called party’s telephone when receiving
a SIP CO line call.
Default
No
Document Version 2016-03 PC Programming Manual 331
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property