Panasonic KX-NS1000 - Network Service-[3-3] Client Feature-SNMP Agent

28.3.3 Network Service—[3-3] Client Feature—SNMP Agent
Using SNMP
(Simple Network Management Protocol), it is possible for a PC assigned as an SNMP manager
to manage and receive PBX system status information, such as alarm information and general system activity.
The related PBX system settings can be programmed.
This option is only available at Installer level.
SNMP agent
Enables the PBX to use its SNMP agent function.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
28.3.3 Network Service—[3-3] Client Feature
—SNMP Agent
Feature Manual References
18.1.7 SNMP (Simple Network Management Protocol) System Monitor
SNMP version
Specifies the version of the SNMP protocol to use.
Default
SNMP V2c
Value Range
SNMP V1, SNMP V2c
Maintenance Console Location
28.3.3 Network Service—[3-3] Client Feature
—SNMP Agent
Feature Manual References
18.1.7 SNMP (Simple Network Management Protocol) System Monitor
SNMP manager port
Specifies the SNMP manager port.
Default
161
Value Range
161, 1024–65535
Document Version 2016-03 PC Programming Manual 1223
28.3.3 Network Service—[3-3] Client Feature—SNMP Agent