Panasonic KX-NS1000 - Page 1036

Start Date (Month Day)
Specifies
the month and day of the holiday start date. Click the cell to display a calendar. Select a month using
the arrow buttons, and click on a day for the selected month. This setting synchronizes with the PBX’s Holiday
Table.
Default
Not stored
Value Range
Month and Day
Maintenance Console Location
23.4 UM Configuration—[4-4] Service Settings—Holiday Table
Feature Manual References
20.1.43 Unified Messaging—Holiday Service
PC Programming Manual References
10.5 PBX Configuration—[2-5] System—Holiday Table
→
Holiday Table—Start Date—Month
→ Holiday Table—Start Date—Day
Start Time
Specifies the time of day on the specified date at which to begin the holiday service. Click the cell to display
an array of hours and minutes. Select an hour of the day and a minute of the hour to set the time.
Default
Not stored
Value Range
Hour and Minute
Maintenance Console Location
23.4 UM Configuration
—[4-4] Service Settings—Holiday Table
Feature Manual References
20.1.43 Unified Messaging—Holiday Service
End Date (Month Day)
Specifies
the month and day of the holiday end date. Click the cell to display a calendar. Select a month using
the arrow buttons, and click on a day for the selected month. This setting synchronizes with the PBX’s Holiday
Table.
Default
Not stored
1036 PC Programming Manual Document Version 2016-03
23.4 UM Configuration—[4-4] Service Settings—Holiday Table