Panasonic KX-NS1000 - Page 1097

Maintenance Console Location
27.1.3 Router Configuration—Setup—[1-1-3] Router Information—VPN Status
Status
Indicates the status of each VPN tunnel connection
(reference only).
Default
No Connect
Value Range
No Connect, Connected, Fault
Maintenance Console Location
27.1.3 Router Configuration—Setup—[1-1-3] Router Information—VPN Status
Action
Click this button and select Connect or Disconnect for VPN tunnel connection. If No Connect or Fault is
indicated for Status, Connect is displayed. Otherwise Disconnect is displayed.
However, if Dynamic is selected for Remote IP Address Type in 27.10 Router
Configuration
—VPN—[3-2] IPSec—SA (ISAKMP), Disconnect is always displayed. This setting is available
for the Installer level account and User (Administrator) level account.
Default
Disconnect
Value Range
Disconnect, Connect
Maintenance Console Location
27.1.3 Router Configuration—Setup—[1-1-3] Router Information—VPN Status
RCV
Indicates the number of packets received at this port since the last reset
(reference only).
This value will reset to zero after the maximum value is reached.
Default
0
Value Range
0–9999999
Maintenance Console Location
27.1.3 Router Configuration—Setup—[1-1-3] Router Information—VPN Status
Document Version 2016-03 PC Programming Manual 1097
27.1.3 Router Configuration—Setup—[1-1-3] Router Information—VPN Status