Panasonic KX-NS1000 - Page 1066

Feature Manual References
2.1.6 Automatic Fax Transfer
20.1.38 Unified Messaging—Fax Server
Fax Properties—System Name (Up to 25 characters)
Specifies
the system name for the fax server. This name will appear on the cover page of fax messages sent
by the fax server.
Default
Not stored
Value Range
Max. 25 characters
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Feature Manual References
20.1.38 Unified Messaging—Fax Server
Fax Properties—System Fax Number (Max. 20 digits)
Specifies
the system fax number for the fax server. This number will appear on the cover page of fax messages
sent by the fax server.
Default
Not stored
Value Range
Max. 20 digits
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Feature Manual References
20.1.38 Unified Messaging—Fax Server
Fax Properties—Number of Retries (0-99)
Specifies
the number of times a fax will be re-sent if initial sending fails. If the fax cannot be sent within the set
number of retries, a non-delivery notification voice message will be sent to the target mailbox.
Default
5 times
Value Range
0–99 times
1066 PC Programming Manual Document Version 2016-03
24.4 UM Configuration—[5-4] System Parameters—Parameters