Maintenance Console Location
27.10 Router Configuration—VPN—[3-2] IPSec
Subnet Mask
Specifies the subnet mask for the source IP Address of the SA.
This setting can be set to blank only if Any is selected for Source Type.
Default
255.255.255.0
Value Range
Blank, 0.0.0.0–255.255.255.255
Maintenance Console Location
27.10 Router Configuration
—VPN—[3-2] IPSec
Destination Type
Selects the destination type of the SA.
Default
Any
Value Range
Any, IP Address
Maintenance Console Location
27.10 Router Configuration
—VPN—[3-2] IPSec
Destination IP Address
Specifies the destination IP Address of the SA.
This setting is available only if IP Address is selected for Destination Type.
This setting can be set to blank only if Any is selected for Destination Type.
Default
192.168.1.0
Value Range
Blank, 1.0.0.0–223.255.255.255
Maintenance Console Location
27.10 Router Configuration
—VPN—[3-2] IPSec
Subnet Mask
Specifies the subnet mask for the destination IP Address of the SA.
This setting can be set to blank only if Any is selected for Destination Type.
Document Version 2016-03 PC Programming Manual 1157
27.10 Router Configuration—VPN—[3-2] IPSec
To Next Page
Loading...
