Value Range
Any, IP Address
Maintenance Console Location
27.10 Router Configuration
—VPN—[3-2] IPSec
Source IP Address
Specifies the source IP Address of the SA.
This setting is available only if IP Address is selected for Source Type.
This setting can be set to blank only if Any is selected for Source Type.
Default
192.168.0.0
Value Range
Blank, 1.0.0.0–223.255.255.255
Maintenance Console Location
27.10 Router Configuration
—VPN—[3-2] IPSec
Subnet Mask
Specifies the subnet mask for the source IP Address of the SA.
This setting can be set to blank only if Any is selected for Source Type.
Default
255.255.255.0
Value Range
Blank, 0.0.0.0–255.255.255.255
Maintenance Console Location
27.10 Router Configuration
—VPN—[3-2] IPSec
Source Port Type
Selects the method of specifying the source port number.
Default
Any
Value Range
Any, Fixed
Maintenance Console Location
27.10 Router Configuration
—VPN—[3-2] IPSec
1160 PC Programming Manual Document Version 2016-03
27.10 Router Configuration—VPN—[3-2] IPSec
To Next Page
Loading...
