Panasonic KX-NS1000 - Page 1183

WAN QoS—TOS (DSCP)—TOS(DSCP) Value (0-63)
Specifies the TOS (DSCP) value.
If TOS(DSCP) Value (0-63) is not selected for TOS (DSCP), this item is grayed out.
Default
0
Value Range
0–63
Maintenance Console Location
27.12 Router Configuration
—QoS Settings—[4] QoS Service
WAN QoS—TOS Mapping—Enable
Specifies whether to enable TOS mapping.
Default
OFF
Value Range
OFF, ON
Maintenance Console Location
27.12 Router Configuration
—QoS Settings—[4] QoS Service
WAN QoS—TOS Mapping—TOS(DSCP) Value (0-63)
Specifies the TOS (DSCP) value.
If above Enable is not checked, this item is grayed out.
Default
0
Value Range
0–63
Maintenance Console Location
27.12 Router Configuration
—QoS Settings—[4] QoS Service
Bandwidth Control—Enable
Selects whether to enable bandwidth control.
If Enable is not selected, Priority Queue 0(kbps), Priority Queue 1(kbps), Priority Queue 2(kbps) and
Priority Queue 3(kbps) are grayed out.
Default
OFF
Document Version 2016-03 PC Programming Manual 1183
27.12 Router Configuration—QoS Settings—[4] QoS Service