Note
Be
sure to change the user name from its initial, default value. Also, for security reasons, change the user
name regularly.
Default
ftpuser
Value Range
Max. 24 characters (a–z, 0–9, [hyphen], [underscore])
Note
The first character must be a letter (a–z).
Maintenance Console Location
28.2.2 Network Service—[2-2] Server Feature—FTP
User Information—Password
Specifies the password for the PBX’s FTP server authentication.
Note
Be sure to change the password from its initial, default value. Also, for security reasons, change the
password regularly.
Default
1234
Value Range
Max. 24 characters (A–Z, a–z, 0–9, [hyphen], [underscore])
Note
The first character must be a letter or number.
Maintenance Console Location
28.2.2 Network Service—[2-2] Server Feature—FTP
1204 PC Programming Manual Document Version 2016-03
28.2.2 Network Service—[2-2] Server Feature—FTP
To Next Page
Loading...
