Panasonic KX-NS1000 - Page 1226

Feature Manual References
18.1.7 SNMP (Simple Network Management Protocol) System Monitor
Trap port
Specifies a port number used to send trap messages from the agent to an SNMP manager.
Default
162
Value Range
162, 1024–65535
Maintenance Console Location
28.3.3 Network Service—[3-3] Client Feature
—SNMP Agent
Feature Manual References
18.1.7 SNMP (Simple Network Management Protocol) System Monitor
Community name
Specifies a community name of an SNMP manager.
Default
public
Value Range
Max. 32 characters
Maintenance Console Location
28.3.3 Network Service—[3-3] Client Feature
—SNMP Agent
Feature Manual References
18.1.7 SNMP (Simple Network Management Protocol) System Monitor
TRAP filtering—Standard TRAP
Selects whether the PBX sends standard trap messages to an SNMP manager or not.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
28.3.3 Network Service—[3-3] Client Feature
—SNMP Agent
1226 PC Programming Manual Document Version 2016-03
28.3.3 Network Service—[3-3] Client Feature—SNMP Agent