Sub Code Description
YY
Slot Number
When X is not 4 or 5
Physical shelf
Mother board slot: 00
Regular slots: 01–
05
Legacy gateway
STACK-S card: 00
Optional physical service card slots:
– KX-TDE600/KX-TDA600: 01–10
– KX-TDE620/KX-TDA620: 01–11
– KX-NCP500/KX-NCP1000/KX-NS1020: 01–07
(Slots 04 and 07 are disregarded for KX-NCP500 PBXs)
Virtual shelf
Virtual CO line slots: 1–16
Virtual Extension slots: 17–36
Virtual IP-CS slots: 37–52
When X is 4
YY: Convert code
When X is 5
YY: Process code
ZZ
Port Number
When X is not 4 or 5
ZZ: Optional service card port number (01–
XX)
When X is 4
ZZ: Convert code
When X is 5
ZZ: Process number (determined by each process)
Note
• When there is no parameter for slot and port number,
YY and ZZ will be displayed as "00".
Example: Sub code for the mother board = "01 10000"
• For more information about Self Numbers and Slot Numbers for KX-NS700 PBXs, refer to the PC
Programming Manual for that PBX.
126 PC Programming Manual Document Version 2016-03
7.3.1 Utility—Log—Error Log
To Next Page
Loading...
