Panasonic KX-NS1000 - 2.11 Conversation Features; 2.11.1 Hands-free Operation

Item Description
Short Term Diag The short term (within the previous 1 hour) diagnosis for LAN
synchronization.
• Indeterminable
: Status cannot be determined.
• Indeterminable (IGMP Querier not found): Status cannot be
determined because the IGMP querier could not be found.
• Under Diagnosis: Diagnosis is being performed.
• OK: Synchronization is OK.
• Not OK (Signal Jitter): Synchronization is susceptible to jitter.
• Not OK (Signal delay): Synchronization is susceptible to delay.
• Conditional OK (Signal Jitter): Synchronization is OK, but jitter
is possible.
• Conditional OK (Signal delay): Synchronization is OK, but
delay is possible.
• Out of Sync: Synchronization cannot be established.
• Out of Sync (10base-T): Synchronization cannot be
established on a 10Base-T connection.
• Out of Sync (100base-TX half): Synchronization cannot be
established on a 100Base-TX half-duplex connection.
• Out of Sync (IGMP Querier not found): Synchronization
cannot be established because an IGMP querier could not be
found.
Long Term Diag The long term diagnosis for LAN synchronization.
• Indeterminable
: Status cannot be determined.
• Indeterminable (IGMP Querier not found): Status cannot be
determined because the IGMP querier could not be found.
• Under Diagnosis: Diagnosis is being performed.
• OK: Synchronization is OK.
• Not OK (Signal Jitter): Synchronization is susceptible to jitter.
• Not OK (Signal delay): Synchronization is susceptible to delay.
• Conditional OK (Signal Jitter): Synchronization is OK, but jitter
is possible.
• Conditional OK (Signal delay): Synchronization is OK, but
delay is possible.
• Out of Sync: Synchronization cannot be established.
• Out of Sync (10base-T): Synchronization cannot be
established on a 10Base-T connection.
• Out of Sync (100base-TX half): Synchronization cannot be
established on a 100Base-TX half-duplex connection.
• Out of Sync (IGMP Querier not found): Synchronization
cannot be established because an IGMP querier could not be
found.
To view LAN synchronization information
1. In the Target IP-CS: CS Name / MAC Address drop-down list, select the CS whose statistics you want
to view.
The selected CS’s MAC address is displayed in the text box, and the statistics for the selected CS are
displayed. The master CS’
s name and MAC address are also displayed for reference.
2. To refresh the display with the latest statistics, click Refresh.
Document Version 2016-03 PC Programming Manual 149
7.5.5 Utility—Report—IP-CS Information