Panasonic KX-NS1000 - Page 176

Call blocking: Handles the call according to the
Incomplete Call Handling for No Answer setting for the
subscriber’s extension. The subscriber’s extension will not ring.
Call screening: The caller is prompted to record his or her name. The Unified Messaging system then calls
the subscriber and plays back the caller name. The subscriber can choose whether to answer the call.
Leave a Message: Transfers the caller to the mailbox.
Intercom Paging: Pages the subscriber by intercom.
Transfer to specified Custom Service Menu: Transfers the caller to the specified Custom Service.
Maintenance Console Location
8.1.1 Users—User Profiles—Advanced setting
Feature Manual References
20.1.14 Unified Messaging—Call Transfer Scenario
Call Transfer Status—VIP Filter
Specifies
whether calls from certain telephone numbers will be transferred directly to a specified extension or
telephone number.
Note
This setting can only be set to "Enable
" when
Call Transfer Status—Selection is set to "Leave a
Message".
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
8.1.1 Users—User Profiles—Advanced setting
Feature Manual References
20.1.14 Unified Messaging
—Call Transfer Scenario
Call Transfer Status—Telephone Number 1, 2, 3
Specifies
the telephone numbers that the VIP Filter setting will be applied to. When a call is received from any
of the numbers specified here, the call will be transferred immediately to the destination specified in
Call
Transfer Status—Transfer to (Selection/Other).
Default
Not stored
Value Range
Max. 32 digits
176 PC Programming Manual Document Version 2016-03
8.1.1 Users—User Profiles—Advanced setting