8. Click OK to complete pre-installation.
You can now click the Legacy-GW1 or Legacy-GW2 shelf buttons to program the cards of the legacy
gateways.
Note
• If Pre-Install
is not displayed as described in step 5, pre-installation has already been completed. Click
Legacy-GW1 or Legacy-GW2 on the slot screen to program the PBXs connected to the STACK-M
card.
• For information about hardware configuration restrictions and conditions for legacy gateways, refer to
Conditions for Connecting Legacy Gateways in 4.6 Stacking Cards in the KX-NS1000 Installation
Manual.
Supported Card Types
Card Maximum Number/PBX Card Programming
LCOT2+SLC2: A combination card
including:
• 2 analog CO line ports
• 2 extension ports for SLTs
1
LCOT2:
9.24 PBX Configuration
—[1-1]
Configuration—Slot—Card Property
- LCO type
SLC2:
9.22 PBX Configuration—[1-1]
Configuration—Slot— SLC2 - Card
Property
PRI:
9.26 PBX Configuration—[1-1]
Configuration—Slot—Card Property
- PRI type
STACK-M:
9.28 PBX Configuration—[1-1]
Configuration—Slot—Legacy-GW1/
Legacy-GW2
PRI23+SLC2: A combination card
including:
• 1
ISDN Primary Rate Interface port
(23B channels).
• 2 extension ports for SLTs
STACK-M: Stacking Master Card for
connecting PBXs as legacy gateways.
V-IPEXT32: Virtual 32-Channel VoIP
Extension Card 8
*1
/20
*2
/8
*3
9.14 PBX Configuration—[1-1]
Configuration
—Slot—V-IPEXT32
—Card Property
V-SIPEXT32: Virtual 32-Channel SIP
Extension Card 20
*1
/8
*2
/12
*3
9.16 PBX Configuration—[1-1]
Configuration
—Slot—V-SIPEXT32
—Card Property
V-UTEXT32: Virtual 32-Channel SIP
Proprietary Telephone Card 20
*1
/8
*2
/12
*3
9.20 PBX Configuration—[1-1]
Configuration
—Slot—V-UTEXT32
—Card Property
V-IPGW16: Virtual 16-Channel VoIP
Gateway Card 3
*1
/3
*2
/6
*3
9.12 PBX Configuration—[1-1]
Configuration
—Slot—V-IPGW16
—Shelf Property
V-SIPGW16: Virtual 16-Channel SIP
CO Line Card 16
*1
/16
*2
/10
*3
9.12 PBX Configuration—[1-1]
Configuration
—Slot—V-IPGW16
—Shelf Property
206 PC Programming Manual Document Version 2016-03
9.1 PBX Configuration—[1-1] Configuration—Slot