Value Range
Disable, Enable
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration
—Slot—System Property
FAX Sending Method
Specifies the method of transporting the fax signal.
Default
G.711 Inband
Value Range
G.711 Inband, T.38
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration
—Slot—System Property
Maximum Bit Rate
Specifies the maximum bit rate of the fax signal.
Default
No Speed Limit
Value Range
No Speed Limit, 2400 bps
, 4800 bps, 7200 bps, 9600 bps, 12000 bps, 14400 bps
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
FAX Detection Ability
Enables
the use of the FAX Detection Ability feature. Since fax signals using a codec other than G.711 cannot
be received accurately at the destination, this feature automatically switches the codec to G.711 to enable
end-to-end fax signal relay over the network.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
230 PC Programming Manual Document Version 2016-03
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
To Next Page
Loading...
