Jitter Buffer Adaptation Period for FAX
Specifies the length of time that the jitter buffer is applied for fax communications.
Default
1800 ms
Value Range
1000–65530 ms
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration
—Slot—Site Property
DTMF Detection Level for G.711A
Specifies the level of DTMF detection for the G.711A codec.
Default
-31 dB
Value Range
-45– -12 dB
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration
—Slot—Site Property
DTMF Detection Level for G.711Mu
Specifies the level of DTMF detection for the G.711Mu codec.
Default
-23 dB
Value Range
-39– -6 dB
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration
—Slot—Site Property
CNG Signal Effective Detection Width 1 (ON)
Specifies the length of time that the PBX detects the CNG signal.
Default
500 ms
Value Range
20–5000 ms
Document Version 2016-03 PC Programming Manual 243
9.5.1 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main
To Next Page
Loading...
