Panasonic KX-NS1000 - Page 246

CNG Signal Fixation Detection Pattern - SIP Extension
Specifies
the CNG signal pattern to be detected before the PBX proceeds the fax operation for SIP extensions.
Default
Off
Value Range
Off, On
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
CED Signal Fixation Detection Time - SIP Extension
Specifies the minimum length of time required for the CED
(called station identification) signal to be detected
by the PBX for SIP extensions.
Default
100 ms
Value Range
50 ´ n (n=1–100) ms
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
T38 FAX Transmit Level (Network to PBX) A-Law
Specifies
the transmission level of G3 fax signals after being converted from T.38 protocol packets, when the
codec used is G.711A.
Default
-8 dB
Value Range
-13–2 dB
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
T38 FAX Transmit Level (Network to PBX) Mu-Law
Specifies
the transmission level of G3 fax signals after being converted from T.38 protocol packets, when the
codec used is G.711Mu.
Default
-2 dB
246 PC Programming Manual Document Version 2016-03
9.5.1 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main