Panasonic KX-NS1000 - 2.25.2 Confirmation Tone

Value Range
20 ms, 30 ms, 40 ms, 50 ms, 60 ms
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration
—Slot—Site Property
Packet Sampling Time (G.711Mu)
Specifies
the time interval between measurements (samples) of sound data during a conversation. The smaller
this number, the higher the quality of the transmitted sound.
Default
20 ms
Value Range
20 ms, 30 ms, 40 ms, 50 ms, 60 ms
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Packet Sampling Time (G.729A)
Specifies the time interval between measurements (samples) of sound data during a conversation. The smaller
this number, the higher the quality of the transmitted sound.
Default
20 ms
Value Range
20 ms, 30 ms, 40 ms, 50 ms, 60 ms
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Port Number
Voice (RTP) UDP Port No. (Server)
Specifies the UDP port used by the system to transmit and receive RTP
(Real-time Transfer Protocol) data.
This must be changed if another network application is using the same port.
For voice communications, the system uses 128 contiguous UDP ports, starting from the port number specified
here.
Default
12000
Value Range
1024–64000
Document Version 2016-03 PC Programming Manual 251
9.5.1 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main