Panasonic KX-NS1000 - Page 276

DSP Digital Gain (Up) on TDM side for conference
Specifies
the DSP Digital Gain for the up voice path for conferencing using TDM circuit mode communication.
Default
-3 db
Value Range
-14–6 dB
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
DSP Digital Gain (Down) on TDM side for conference
Specifies the DSP Digital Gain for the down voice path for conferencing using TDM circuit mode
communication.
Default
0 db
Value Range
-14–6 dB
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration
—Slot—Site Property
EC Gain on TDM side for conference
Specifies the error correction gain for conferencing using TDM circuit mode communication.
Default
3 db
Value Range
-14–6 dB
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration
—Slot—Site Property
NLP Setting on TDM side for conference
Specifies the NLP (Non
-Linear Processor) setting for conferencing using TDM circuit mode communication.
Default
Weak
Value Range
Disable, Weak, Normal, Strong
276 PC Programming Manual Document Version 2016-03
9.5.1 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main