E.164 - Prefix for own system
Specifies the Mobile Device Access prefix for incoming calls from E.164
-enabled mobile devices.
Default
Not stored
Value Range
Max. 16 characters
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
E.164 - Prefix for other system
Specifies the Mobile Device Access outgoing prefix for calls made to E.164
-enabled mobile devices.
Default
Not stored
Value Range
Max. 16 characters
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
E.164 - Additional Dial
Specifies
additional digits to be inserted before the dialed number of an incoming call from an E.164-enabled
mobile device.
Default
Not stored
Value Range
Max. 7 digits (consisting of 0–9, *, and #)
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
Voice/FAX
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Connection
Indicates
the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Document Version 2016-03 PC Programming Manual 317
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
To Next Page
Loading...
