Panasonic KX-NS1000 - 4.1 Public Network Features; 4.1.1 SIP (Session Initiation Protocol) Trunk

Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
FAX Sending Method
Specifies the method of transporting the fax signal.
Default
G.711 Inband
Value Range
G.711 Inband, T.38
Maintenance Console Location
9.11 PBX Configuration
—[1-1] Configuration—Slot—V-SIPGW—Port Property
Maximum Bit Rate
Specifies the maximum bit rate of the fax signal.
Default
No Speed Limit
Value Range
No Speed Limit, 2400 bps
, 4800 bps, 7200 bps, 9600 bps, 12000 bps, 14400 bps
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
FAX Detection Ability
Enables the use of the FAX Detection Ability feature. This feature enables end
-to-end fax signal relay when
the other party prefers a codec other than G.711. This feature functions only if the other party supports G.711.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
DTMF
Specifies the method to transport DTMF tones.
Default
Outband (RFC2833)
320 PC Programming Manual Document Version 2016-03
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property