Panasonic KX-NS1000 - Page 323

RTP QoS-HEX
Specifies the value in the ToS field by a hexadecimal number.
Default
Not stored
Value Range
00–FF
Maintenance Console Location
9.11 PBX Configuration
—[1-1] Configuration—Slot—V-SIPGW—Port Property
RTCP Packet Sending Ability
Specifies whether to enable each port to send RTCP packets.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
9.11 PBX Configuration
—[1-1] Configuration—Slot—V-SIPGW—Port Property
RTCP Packet Interval
Specifies the interval time until the next RTCP packet is sent.
Default
5 s
Value Range
5–60 s
Maintenance Console Location
9.11 PBX Configuration
—[1-1] Configuration—Slot—V-SIPGW—Port Property
Keep Alive Timer
Specifies the length of time to send Keep Alive packets for the connection. Specifying
"0 s" will disable the
sending of Keep Alive packets.
Default
0 s
Value Range
0 s, 10 s, 20 s, 30 s, 40 s, 50 s, 60 s
Document Version 2016-03 PC Programming Manual 323
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property