Panasonic KX-NS1000 - Page 325

Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
T38 FAX UDPTL Redundancy count for T.30 messages
Specifies the redundancy count for T.30 messages when using the T.38 protocol.
Default
3
Value Range
0–7
Maintenance Console Location
9.11 PBX Configuration
—[1-1] Configuration—Slot—V-SIPGW—Port Property
T38 FAX UDPTL Redundancy count for data
Specifies the redundancy count for data when using the T.38 protocol.
Default
0
Value Range
0–3
Maintenance Console Location
9.11 PBX Configuration
—[1-1] Configuration—Slot—V-SIPGW—Port Property
T38 FAX Rate Management Method
Specifies the rate management method when using the T.38 protocol.
Default
Transferred TCF
Value Range
Transferred TCF, Local TCF
Maintenance Console Location
9.11 PBX Configuration
—[1-1] Configuration—Slot—V-SIPGW—Port Property
Reject T.38 Request from Network
Specifies whether T.38 protocol data requests are rejected or accepted.
Default
Disable
Document Version 2016-03 PC Programming Manual 325
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property