Panasonic KX-NS1000 - 4.1.2.11 ISDN Service Access by Keypad Protocol

Feature Manual References
15.1.19 Private Network Features—QSIG—CF (Call Forwarding)
Trunk Property
Indicates the networking type of each CO line.
Default
Private
Value Range
Public, Private, VPN
Maintenance Console Location
9.12 PBX Configuration
—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
Outgoing Call
First-digit Timer (T302-1)
Specifies
the length of time within which the first digit of a dial number must be dialed after seizing a virtual IP
CO line.
Default
20 s
Value Range
5–30 s
Maintenance Console Location
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
Inter-digit Timer (T302-2)
Specifies the length of time within which subsequent digits of a dial number must be dialed.
Default
5 s
Value Range
1–10 s
Maintenance Console Location
9.12 PBX Configuration
—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
Dial End Code
Specifies the delimiter code to be used to signal the end of a dialed number.
Document Version 2016-03 PC Programming Manual 339
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property