Panasonic KX-NS1000 - Page 35

Level Login Name Password
Installer INSTALLER 4-16 character password, using a-z, A-Z,
and 0-9 (case sensitive).
For
an initialized PBX that has not yet been
set up, the default Installer level password
is "1234". You will be prompted to choose
a new password for the Installer level
account when the Easy Setup Wizard is run
(see 2.1.4 Easy Setup Wizard).
Administrator 1-16 character login name, using
a-z, A-Z, and 0-9 (case sensitive).
Set during account creation.
(see 8.2.1 Users—Add
User—Single User)
4-16 character password, using a-z, A-Z,
and 0-9 (case sensitive). Set during
account creation.
(see 8.2.1 Users—Add User—Single
User)
User
For more information about creating and managing end user accounts, see Section 8 Users.
CAUTION
To the Administrator or Installer regarding account passwords
1. Please provide all system passwords to the customer.
2. To
avoid unauthorized access and possible abuse of the PBX, keep the passwords secret, and inform
the customer of the importance of the passwords, and the possible dangers if they become known to
others.
3. The PBX has no passwords set initially. For security, select an installer password as soon as the PBX
system is installed at the site.
4. Change the passwords periodically.
5. It is strongly recommended that passwords of 10 numbers or characters be used for maximum
protection against unauthorized access.
6. If a User (User) account password is forgotten, it can be confirmed and/or changed by a User
(Administrator) or Installer account. If a User (Administrator) account is forgotten, it can be confirmed
and/or changed by the Installer account. For details, see 2.1.1 Web Maintenance Console
Accounts.
Note
For
User (Administrator) accounts to change User (User) account passwords, the Installer account
must use the Screen Customize tool to allow User (Administrator) accounts to view the
User—User Profiles screen. For details, see the following sections:
– 6.7 Tool—Screen Customize
– 8.1 Users—User Profiles
If the Installer level password is forgotten, you must reset the PBX to its factory defaults and reprogram
it. Therefore, we strongly recommend maintaining a backup of the system data. For more information
on how to back up the system data, see the following sections:
• 6.1 Tool—System Data Backup
• 6.8 Tool—UM Data Backup
Document Version 2016-03 PC Programming Manual 35
2.1.1 Web Maintenance Console Accounts