Maintenance Console Location
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Manual References
10.1.17 IP-PT (IP Proprietary Telephone)
IP Codec Priority
Specifies the codec used for compression and decompression of transmitted data.
Some codecs may become unavailable depending on the value set here, as follows:
– When G.722 is selected, the priority is G.722 ® G.711 ® G.729A.
– When G.711 is selected, the priority is G.711 ® G.729A (G.722 is unavailable).
– When G.729A is selected, both G.711 and G.722 are unavailable.
Default
G.722
Value Range
G.711, G.729A, G.722
Maintenance Console Location
9.15 PBX Configuration
—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Manual References
10.1.17 IP-PT (IP Proprietary Telephone)
Packet Sampling Time (G.711/G.722)
Specifies the time interval between measurements
(samples) of sound data during a conversation.
The smaller this number, the higher the quality of the transmitted sound.
Default
20 ms
Value Range
20 ms, 30 ms, 40 ms, 60 ms
Maintenance Console Location
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Manual References
10.1.17 IP-PT (IP Proprietary Telephone)
Packet Sampling Time (G.729A)
Specifies the time interval between measurements
(samples) of sound data during a conversation.
Document Version 2016-03 PC Programming Manual 367
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
To Next Page
Loading...
