Default
Primary
Value Range
Primary, Secondary
Maintenance Console Location
9.15 PBX Configuration
—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Manual References
2.1.7 Automatic Rerouting to Secondary PBX
Pair Site
Indicates the site where the assigned secondary port is located
(reference only).
Note
A value will be displayed here only after the Set Secondary command has been executed
(see above).
Default
Not applicable
Value Range
Site number and name
Maintenance Console Location
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Manual References
2.1.7 Automatic Rerouting to Secondary PBX
Pair Slot
Indicates
the number of the virtual card slot in the site where the assigned secondary port is located (reference
only).
Note
A value will be displayed here only after the Set Secondary command has been executed
(see above).
Default
Not applicable
Value Range
Virtual slot number
Maintenance Console Location
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Document Version 2016-03 PC Programming Manual 373
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
To Next Page
Loading...
