Panasonic KX-NS1000 - Page 381

Programming Manual References
9.5.1 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main—Main— P2P Group
Feature Manual References
15.1.5 Peer-to-Peer (P2P) Connection
P2P Group Name
Indicates the selected peer-to-peer group’s name (reference only).
Default
Not stored
Value Range
P2P Group Name
Maintenance Console Location
9.17 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT32—Port Property
Programming Manual References
9.5.1 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main—Main—
P2P Group
11.10 PBX Configuration—[3-10] Group—P2P Group
Feature Manual References
15.1.5 Peer-to-Peer (P2P) Connection
MWI Method
Selects the method of receiving Message Waiting Indications for SIP extensions.
Default
Unsolicited
Value Range
Standard, Unsolicited
Note
If "Standard" is selected, a maximum of 64 SIP extensions can be used.
Maintenance Console Location
9.17 PBX Configuration
—[1-1] Configuration—Slot—V-SIPEXT32—Port Property
Feature Manual References
13.1.3 Message Waiting
18.1.2 SIP (Session Initiation Protocol) Extension
Document Version 2016-03 PC Programming Manual 381
9.17 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT32—Port Property