Panasonic KX-NS1000 - Page 385

Value Range
4–16 characters (consisting of 0
–9, a–z, A–Z)
Maintenance Console Location
9.17 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT32—Port Property
Feature Manual References
18.1.2 SIP (Session Initiation Protocol) Extension
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port. This option is only available in On-line mode.
Default
Fault
Value Range
INS: The port is in service
OUS: The port is out of service
Fault: The port is not communicating with the network.
Maintenance Console Location
9.17 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT32—Port Property
Feature Manual References
18.1.2 SIP (Session Initiation Protocol) Extension
Phone Location
Specifies the type of extension connected to the port.
Default
Local
Value Range
Local: The extension is located on the same network as the PBX
(standard configuration).
Remote (MRG): The extension is accessing the PBX remotely (Media Relay Gateway).
Maintenance Console Location
9.17 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT32—Port Property
Feature Manual References
18.1.2 SIP (Session Initiation Protocol) Extension
Document Version 2016-03 PC Programming Manual 385
9.17 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT32—Port Property