The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration
—[1-1] Configuration—Slot.
CS Name
Specifies the IP-CS (KX-NS0154
only) name of the port.
Default
Not stored
Value Range
Max. 20 characters
Maintenance Console Location
9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property
Connection
Indicates
the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port. This option is only available in On-line mode.
Default
Fault
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property
Primary/Secondary
Specifies the designation of the port as a primary port or secondary port.
Note
If an IP-CS has been registered to the port, this setting cannot be changed from Primary to Secondary.
De-register the port to change this setting.
Default
Primary
Value Range
Primary, Secondary
Maintenance Console Location
9.19 PBX Configuration
—[1-1] Configuration—Slot—V-IPCS4—Port Property
Document Version 2016-03 PC Programming Manual 401
9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property
To Next Page
Loading...
