Panasonic KX-NS1000 - Page 403

Default
Not stored
Value Range
Port number
Maintenance Console Location
9.19 PBX Configuration
—[1-1] Configuration—Slot—V-IPCS4—Port Property
Feature Manual References
2.1.7 Automatic Rerouting to Secondary PBX
Remote Place
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
CS Name
Specifies the IP-CS (KX-NS0154
only) name of the port.
Default
Not stored
Value Range
Max. 20 characters
Maintenance Console Location
9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property
Connection
Indicates
the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port. This option is only available in On-line mode.
Default
Fault
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property
Document Version 2016-03 PC Programming Manual 403
9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property