ISDN Extension—T305
Specifies the maximum time that the PBX waits for a reply after sending the DISC
(disconnection) message
to ISDN.
Default
300
Value Range
0–3000 ´ 100 ms
Maintenance Console Location
9.26 PBX Configuration—[1-1] Configuration—Slot—Card Property - PRI type
ISDN Extension—T306
Specifies the maximum time that the PBX waits for a reply after sending the DISC
(disconnection) message
to ISDN. This setting is used when inband tones are supplied.
Default
300
Value Range
0–3000 ´ 100 ms
Maintenance Console Location
9.26 PBX Configuration—[1-1] Configuration—Slot—Card Property - PRI type
ISDN Extension—T307
Specifies the maximum time that the PBX maintains a suspended call, before restarting.
Default
1800
Value Range
0–6000 ´ 100 ms
Maintenance Console Location
9.26 PBX Configuration
—[1-1] Configuration—Slot—Card Property - PRI type
ISDN Extension—T308
Specifies the maximum time that the PBX waits for a reply after receiving the Release message from ISDN.
Default
40
Value Range
0–600 ´ 100 ms
448 PC Programming Manual Document Version 2016-03
9.26 PBX Configuration—[1-1] Configuration—Slot—Card Property - PRI type
To Next Page
Loading...
