COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR,
CF (Rerouting), CT, CCBS, E911
Specifies whether each ISDN or QSIG supplementary service is used.
The available services depend on the setting of
Port Type on this screen.
Default
COLP: No
CLIR: Yes
COLR: No
CNIP: No
CONP: No
CNIR: No
CONR: No
CF (Rerouting): No
CT: No
CCBS: No
E911: Yes
Value Range
No, Yes
Maintenance Console Location
9.27 PBX Configuration
—[1-1] Configuration—Slot—Port Property - PRI Port
Feature Manual References
4.1.15 CLIP (Calling Line Identification Presentation)
15.1.18 Private Network Features—QSIG—CCBS (Completion of Calls to Busy Subscriber)
15.1.20 Private Network Features—QSIG—CLIP/COLP (Calling/Connected Line Identification Presentation)
and CNIP/CONP (Calling/Connected Name Identification Presentation)
15.1.19 Private Network Features—QSIG—CF (Call Forwarding)
15.1.21 Private Network Features—QSIG—CT (Call Transfer)
Document Version 2016-03 PC Programming Manual 463
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
To Next Page
Loading...
